COB Fine Pitch LED Display

COB Fine Pitch LED Display
Product Introduction:
The HD 600 Series includes two clearly identified COB fine pitch LED display models: P1.5 and P1.86. Both use 150 × 168.75 mm LED modules and a full front-service structure. With defined module resolutions, high refresh rates and front-access maintenance, these models provide configuration options for indoor fine-pitch LED display projects.
Send Inquiry
Description
Technical Parameters

Shenzhen ABXLED Industrial Co., Ltd. is one of the leading manufacturers and suppliers of cob fine pitch led display in China. We are committed to providing high quality customized products with competitive price. If you're going to wholesale advanced cob fine pitch led display, welcome to get quotation from our factory.

 

The HD 600 Series includes two clearly identified COB fine pitch LED display models: P1.5 and P1.86. Both use 150 × 168.75 mm LED modules and a full front-service structure. With defined module resolutions, high refresh rates and front-access maintenance, these models provide configuration options for indoor fine-pitch LED display projects.

COB Models and Pixel Pitch Specifications

Model Package Type Pixel Pitch Pixel Density Module Size Module Resolution Driving Mode
HD 600 P1.5 COB 1.5 mm 422,500 pixels/m² 150 × 168.75 mm 96 × 108 1/54
HD 600 P1.86 COB 1.86 mm 288,369 pixels/m² 150 × 168.75 mm 80 × 90 1/40

The HD 600 technical specifications identify P1.5 and P1.86 as COB models. Other pixel-pitch options listed in the series, including P0.62, P0.78, P0.93 and P1.25, are identified as GOB rather than COB and are therefore excluded from this COB model list.

Display Performance and Front Maintenance

The HD 600 Series technical specifications list the following display and operating parameters:

Item Specification
Brightness 800–2000 cd/m²
Refresh Rate ≥3840 Hz
Grayscale 14–16 bit
Viewing Angle 140°
Maximum Power Consumption 600 W/m²
Average Power Consumption 180 W/m²
Input Voltage AC 100–240 V, 50–60 Hz
Operating Temperature -30°C to +60°C
Protection Rating IP38

These are series-level specifications; values are not separately assigned to P1.5 and P1.86 where model-specific data is unavailable.

The display uses a full front-service structure. LED modules connect through a HUB for power and data transmission. An electric vacuum suction cup is used to remove and replace modules, allowing maintenance from the front without relying on rear access.

Customization and Project Configuration

ABXLED provides customization options in three identified areas:

Customization Item Available Scope
Pixel Pitch Customized pixel-pitch options
Screen Shape Customized screen shapes
Installation Customized installation solutions

These options allow project configurations to be discussed according to the required screen shape, pixel pitch and installation arrangement.

Manufacturing, Quality Control and Supply Support

ABXLED operates a 10,000 m² factory with a stated overall LED display production capacity of 10,000 m² per month. Its production facilities include:

  • 7 fully automatic SMT production lines
  • 2 automatic indoor LED display production lines
  • 7 module aging lines
  • 6 complete-screen aging lines

Quality control includes incoming material inspection (IQC), AOI inspection during SMT production, aging testing and finished-product inspection.

For project support, ABXLED provides solution design, structural engineering, product customization, installation guidance and technical support during commissioning. For the HD 600 Series, spare modules can be supplied as required, with module replacement guidance also available.

Request a COB LED Display Quote

Send us your available pixel pitch, screen dimensions, required quantity or project images. We will review the available COB configuration and prepare a quotation based on your project requirements.

Request a COB LED Display Quote

 

Hot Tags: cob fine pitch led display, China cob fine pitch led display manufacturers, suppliers, factory

Send Inquiry