LED Stage Floor Display

LED Stage Floor Display
Product Introduction:
A stage floor display must support people and equipment while maintaining a stable display surface. The modular floor structure is designed for applications where load-bearing performance and screen configuration need to be considered together.
Send Inquiry
Description
Technical Parameters

Shenzhen ABXLED Industrial Co., Ltd. is one of the leading manufacturers and suppliers of led stage floor display in China. We are committed to providing high quality customized products with competitive price. If you're going to wholesale advanced led stage floor display, welcome to get quotation from our factory.

 

Load Capacity and Structural Performance

A stage floor display must support people and equipment while maintaining a stable display surface. The modular floor structure is designed for applications where load-bearing performance and screen configuration need to be considered together.

  • Load capacity: Up to 2,000 kg/m²
  • Cabinet height: 90 mm
  • Surface option: Tempered glass surface with a published Mohs hardness of 8
  • Installation: Modular cabinet assembly with adjustable installation height

The actual load-bearing suitability depends on the selected cabinet configuration, installation surface, load distribution, and project conditions. Please confirm the required load type and application before ordering, especially for installations involving concentrated or dynamic loads.

Display Performance and Specifications

The DF Series LED floor display offers four pixel pitch options for different viewing distances and display requirements. Buyers can select a configuration according to screen size, content detail, viewing position, and project budget.

Parameter P1.95 P2.5 P2.976 P3.91
Pixel Pitch 1.95 mm 2.5 mm 2.976 mm 3.91 mm
LED Type SMD1515 SMD1515 SMD1515 SMD1921
Pixel Density 262,144 pixels/m² 160,000 pixels/m² 112,896 pixels/m² 65,536 pixels/m²
Brightness 800 nits 800–3,000 nits 800–3,000 nits 800–3,000 nits
Refresh Rate 3,840 Hz 3,840 Hz 3,840 Hz 3,840 Hz
Grayscale 14–16 bit 14–16 bit 14–16 bit 14–16 bit
Viewing Angle (H/V) 160°/140° 160°/140° 160°/140° 160°/140°

The P1.95 option provides the highest pixel density in this range for applications requiring finer image detail. P2.5 and P2.976 offer alternative balances between image detail and screen configuration, while P3.91 provides a wider-pitch option for projects where the viewing distance allows it.

Brightness requirements should be assessed according to the venue's ambient lighting and intended use. The available brightness configuration should be confirmed when specifying the final system.

Modular Cabinet Design and Installation

The modular LED stage floor display structure allows buyers to plan screen dimensions and layouts according to the stage or venue.

Parameter Available Configuration
LED Module Size 250 × 250 mm
Cabinet Size 500 × 500 × 90 mm
Cabinet Size 500 × 1,000 × 90 mm
Cabinet Weight 14.8 kg for 500 × 500 mm cabinet
Cabinet Weight 25.8 kg for 500 × 1,000 mm cabinet
Maintenance Rear service

Modular cabinets can be assembled into different floor dimensions and layouts. Tool-free height adjustment is available to support installation and alignment requirements.

Rear maintenance access allows technicians to service the display from the back of the cabinets. When planning a project, buyers should consider the available maintenance space, cable routing, floor structure, and installation height.

Interactive Features and Control Options

An interactive LED floor display can combine video playback with visual effects triggered by movement or touch. The interactive configuration supports applications such as dance floors, stage performances, exhibitions, and audience engagement areas.

Available interactive functions include:

  • Motion sensing and movement-triggered visual effects
  • Up to 16 simultaneous touch points
  • Response time of less than 5 ms
  • Synchronous and asynchronous control options
  • Timed content switching
  • Remote centralized control

The display can also be integrated into projects that use other LED displays. Buyers should provide the existing control system and equipment details so that the required signal connections and system configuration can be checked before production.

Customization and Configuration Options

Custom LED stage floor display configurations can be planned according to project dimensions, display requirements, installation conditions, and interactive functions.

Available configuration options include:

  • Pixel pitch: P1.95, P2.5, P2.976, and P3.91
  • Cabinet dimensions: 500 × 500 mm and 500 × 1,000 mm
  • Screen layout: Modular arrangements based on the required floor dimensions
  • Surface: Tempered glass surface option
  • Interactive functions: Configuration according to the required interaction method
  • System accessories: Spare modules and related control equipment

For a project quotation, provide the required screen dimensions, preferred pixel pitch, installation layout, and interactive requirements. Drawings or site photos can also help confirm the cabinet arrangement and system configuration.

Protection, Operating Conditions and Maintenance

The LED floor display is designed for indoor stage and event applications. Protection configuration and installation conditions should be checked against the actual venue environment.

Parameter Published Specification
Protection Rating IP31 / IP65 configuration
Operating Temperature -30°C to +60°C
Storage Temperature -30°C to +60°C
LED Light-Source Lifespan 100,000 hours
Maintenance Method Rear service
Warranty 3 years

The IP protection rating should be confirmed for the front and rear of the selected configuration. The 100,000-hour figure refers to the LED light source, not a guaranteed service life for the complete display system.

For outdoor installations or venues exposed to rain, direct sunlight, or other demanding environmental conditions, confirm the required protection and operating configuration before ordering. Regular inspection of connections, cabinet alignment, surface condition, and power distribution is recommended as part of routine maintenance.

Manufacturing and Quality Control for LED Stage Floor Displays

As an LED display manufacturer in China, we carry out production and quality control across key manufacturing stages, from incoming material inspection to finished display testing.

Our factory has a published area of 10,000 m² and operates 7 automated SMT lines. Its production equipment also includes automatic dispensing and module screw-locking machines, module aging lines, and LED display aging lines.

Quality control procedures include:

  • Incoming Quality Control (IQC) for incoming materials
  • AOI inspection during SMT production
  • Sealing checks during encapsulation
  • Aging tests for LED modules and finished displays
  • Final inspection before shipment

Our published production capacity is up to 10,000 m² per month across our LED display production operations. Actual floor display production schedules and order lead times depend on the selected configuration and order quantity.

Packaging and After-Sales Support

Floor display cabinets and accessories can be packed in wheeled flight cases for transportation and project handling. Spare modules can also be included according to the buyer's maintenance and replacement requirements.

Available support includes:

  • Installation manuals and operating tutorials
  • Remote technical guidance
  • Troubleshooting and parameter adjustment
  • System optimization support
  • Spare parts supply
  • Extended warranty and maintenance service options

A 3-year warranty is available for the specified product configuration. Warranty coverage, service terms, and included spare parts should be confirmed in the quotation and order agreement.

Frequently Asked Questions

What load capacity can the LED Stage Floor Display support?

The published load capacity is up to 2,000 kg/m². Actual suitability depends on the cabinet configuration, installation surface, load distribution, and application. Confirm the required load conditions before placing an order.

Can the floor display produce interactive visual effects?

Yes. Interactive configurations support movement-triggered effects and up to 16 simultaneous touch points, with a published response time of less than 5 ms. The interaction method should be specified when selecting the system.

Can the LED floor display work with an existing stage LED display system?

It can be integrated into projects using other LED displays. The control system, processor, signal connections, and operating requirements should be checked against the existing equipment before the system configuration is confirmed.

Is the LED Stage Floor Display suitable for outdoor use?

The product is primarily positioned for indoor stage and event applications. Outdoor use requires confirmation of the front and rear protection ratings, installation conditions, and environmental requirements for the selected configuration.

What cabinet sizes are available?

The published cabinet sizes are 500 × 500 × 90 mm and 500 × 1,000 × 90 mm. The two cabinet formats can be used in modular floor layouts according to the project dimensions.

Can spare modules and maintenance accessories be supplied?

Yes. Spare modules and related accessories can be included according to the project requirements. Buyers should specify the expected operating schedule and maintenance plan when requesting a quotation.

Request a Quote for Your LED Stage Floor Display

Send us your required screen dimensions, pixel pitch, estimated quantity, installation layout, and interactive requirements. If available, include project drawings, site photos, or details of your existing LED control system.

As a China-based LED display manufacturer, we can review the project requirements and provide a suitable LED Stage Floor Display configuration, including cabinet arrangement, system options, and quotation details.

Request a Quote

 

Hot Tags: led stage floor display, China led stage floor display manufacturers, suppliers, factory

Send Inquiry